Fleishman reports on Draft 11n issues

Photo of author

Tim Higgins

Glenn Fleishman has a long piece over at Wi-Fi Networking News that expands on some of the issues I covered in my post of a few weeks ago. It also provides some new insight into some of the issues regarding 11n and its operation in the 5 GHz band.

Glenn gives props to Apple for its decision to not allow use of “wide channels”, i.e. channel bonding or 40 MHz mode, in the 2.4 GHz band. It should also be noted, however, that Intel has done the same thing in its new draft 11n chipset. Buffalo Technology didn’t go quite as far with its new dual-band gear, choosing only to default to 20 MHz mode in the 2.4 GHz band. It’s still possible for a user to manually switch the Buffalo gear to channel-bonding mode, however.

Related posts

Blogs now integrated

I finally got around to pulling the Blogs into the main site. They were running on a standalone install of ...

Yep, Postini Really Was Down

Updated 10/15/09 If you use Postini to handle your mail, you might be wondering where all your mail was today.

Linksys Range Plus is Draft 11n in Disguise

Today's announcement by Linksys of its "affordable" Range Plus product line (WRT100, WPC100) is an odd one. The product line is described as using "MIMO" technology to provide extended coverage at a price point around $100. But a look at the FCC Test report reveals the real technology used.