Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

SMC Networks yesterday announced the start of shipments of its Barricade N Draft 11n Broadband Router (SMCWBR14-N2).

The product has both ‘Works with Windows Vista’ and Wi-Fi certifications. Hardware features include a 4-port 10/100 switch, firewall with Stateful Packet Inspection (SPI) and "intelligent stream handling" technology. WPA and WPA2 wireless encryption is supported along with Wi-Fi Protected Setup (WPS) for easy push button or PIN-configuration wireless security setup.

The SMCWBR14-N2 is priced at $114.99 (MSRP).

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Qualcomm announced today their first 60GHz Wi-Fi chipsets based on the 802.11ay-draft specification. QCA64x8 series (QCA6438 and QCA6428) for fixed in...
Continuation of. . .https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-60sf.48805/New version of my custom firmware build: 1.0....
As in subject, all my 5GHz clients as shown as wired. ASUS RT-AC87U, running Merlin 384.7.The first two are wired, the rest 5GHz.Am I only having this...
@Martineau I really could use your expertise on solving this problem I have been working on for a while. Or anyone else who might know what I am missi...
Hello,I need to access my RT-AC68U in SSH. So I configured the router as follows:Enable SSH = LAN OnlyAllow SSH Port Forwarding = Yes (not sure this i...

Don't Miss These

  • 1
  • 2
  • 3