Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

It is also the first 802.11n solution to be designed using 65 nanometer CMOS processes. The device is "less than half the size" of multi-chip 802.11n solutions and consumes up to 50 percent less power.

The BCM4322 is sampling now, with production quantities expected to ship in the first quarter of 2008.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

In the past USB 2.0 was recommended for stability and not interfering with 2.4G bandwidth.In the new AX line, where USB 3.0 is native, is this still a...
Continuation of:https://www.snbforums.com/threads/custom-firmware-build-for-r9000.40125/. . .https://www.snbforums.com/threads/custom-firmware-build-f...
New firmware showed up in my AC86u router GUI, any guinea pigs yet?
Hi guys, this is my first post on the forum so please forgive any mistakes!What I'm wondering is: When updating the firmware to the newest version, ma...
Hi,I would like to configure a static local IPv6 address prefix (as defined by RFC 4193 Unique Local IPv6 Unicast Addresses) on my RT-AC87U router usi...

Don't Miss These

  • 1
  • 2
  • 3