Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Cisco logo Cisco has announced a new dual-band 802.11n wireless bridge.

The Linksys WES610N Wireless-N Dual-Band Entertainment Bridge enhances Cisco's consumer wireless bridge line by integrating a four-port 10/100 Ethernet switch. It joins the venerable WET610N [reviewed], which has only a single 10/100 port.

Cisco Linksys WES610N

Both have switchable dual-band 802.11a/b/g/n radios, support WEP, WPA, WPA2 and WPS wireless security and have simple priority-based QoS.

The Linksys WES610N Wireless-N Dual-Band Entertainment Bridge is available now for $129.99 MSRP.

More Wireless

Zyxel logo

Is Cloud-Based Network Management Right for You? - Cloud managed networks aren't just for Enterprises anymore.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

This is just to share an observation some might know to expect... my AiMesh wireless backhaul is barely a steady 4 bars, but turning on an attached US...
Intro. Based on some reading and positive impressions, a number of years ago I upgraded from a "whole house wifi router " to an Engenius POE kit with ...
I am trying to calculate the run time of a UPS for a mini aquarium. If the power fails the pump stops, which supplies water to the rear wall that is c...
Hi,I received a script to run with Merlin where I don't know how to load it. What do I need to do?I've had a look around but I can't find a user guide...
Currently i'm running Voxels latest build ( V1.0.2.54SF) which overall seems to work just fine. I know I can set a client device to low,medium,high,hi...

Don't Miss These

  • 1
  • 2
  • 3