Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Buffalo logoUpdated - Buffalo plans to ship its first 802.11ac products in June.

A press release posted on Buffalo's UK site says the company will start shipping the AirStation WZR-D1800H. This is a different model from the AirStation WZR-1750H (below) shown at this past January's CES.

Buffalo AirStation WZR-1750H 802.11ac router

The release says the WZR-D1800H will have Gigabit Ethernet WAN and four LAN ports, one 1.3 Gbps draft 802.11ac 5 GHz radio and one 450 Mbps 802.11bgn 2.4 GHz radio.

Buffalo also plans to ship a draft 802.11ac media bridge. The WLI-TX4-1300H has four switched Gigabit Ethernet ports and is 5 GHz 802.11ac only.

If Buffalo holds the June ship date, it will be about one quarter earlier than the back-to-school timeframe expected for the latest generation of Wi-Fi products. Since the 802.11ac standard is still in development, all products shipped for the next year or so will be draft 802.11ac. The standard currently stands at Draft 2.0 with standard approval currently scheduled for December 2013.

No word on pricing yet. Buffalo will be demonstrating the draft 802.11ac products at at The Gadget Show Live 2012 in Birmingham England from April 11-15.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have AX88U running 384.12 beta (but this problem also occurs on 384.11, therefore it is not the problem of beta firmware). I have tried to set up WP...
Hello everyone. I am new here, and I am trying to figure out how to do something. I would like to run 6 to 8 IP cameras and view them with my phone re...
Hi guys,I got the router several days ago and was trying to enable the 160mhz mode. However I can't find channel 50 and 114 (160mhz channel) in the li...
Hey guys,I have the RT-AC68U router using 384.11_2 Merlin firmware. My main device (desktop connected via ethernet) seems to interfere with another de...
Hi everyone once more.I've noticed that on some points at my home, I get very weak WiFi signal.What should be a best buy? A WiFi Extender or an Access...

Don't Miss These

  • 1
  • 2
  • 3