Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Ruckus Wireless logoRuckus Wireless has announced two new 802.11n access points.

The ZoneFlex 7982 is a dual-band three-stream 802.11n access point designed for "high-capacity" environments such as stadiums, airports and schools. It is based on a "latest generation" Qualcomm Atheros three-stream N chipset and is said to be able to support 500 simultaneous clients with link rates up to 450 Mbps with three-stream clients.

Ruckus attributes the 7982's performance to a patented, dual-polarized adaptive antenna array (photo below), beamforming and maximal ratio combining (MRC) techniques.

Ruckus ZoneFlex 7982

Ruckus ZoneFlex 7982

The ZoneFlex 7321 uses similar technology but supports only a maximum of 256 concurrent users and has a single dual-band two-stream radio supporting maximum link rates of 300 Mbps.

Ruckus ZoneFlex 7321

Ruckus ZZoneFlex 7321

Both APs support 802.3af power over Ethernet (PoE) and can be deployed as either standalone or as part of a centrally-managed WLAN. Other features of both products include bandsteering, airtime fairness and predictive, capacity-driven channel selection.

The ZoneFlex 7982 and 7321 are shipping now at MSRPs of $1099 and $349, respectively.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

11ax is supposed to address the problem of density.Does 11ax router really help if you have a whole house full of 11n 2.4ghz IoT devices?Personal expe...
Greetings.My log file is getting bombarded with successful Dropbear messages, everytime Home Assistant is checking on things (ssh is only open to LAN....
Hi All,Just a quick one. I have successfully installed the Voxel firmware for my R9000 using expressVPN.Everything actually seems to be working VPN wi...
My RT-AC68P has two USB ports, one each 2.0 and 3.0. I have two flash drives, one USB 3.0 and the other not 3.0. If I plug the 3.0 drive into the 2.0 ...
i have an rt ac68u merlin firmware running a client vpn connected to a pay vpn service so all my devices are behind.On the router runs an openvpn serv...

Don't Miss These

  • 1
  • 2
  • 3