Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

LaCie logoNETGEAR is demoing a cable modem router with draft 802.11ac wireless built in.

The company is showing a new 802.11ac DOCSIS3.0 gateway at the ANGA Cable show this week in Cologne, Germany.

Feature set is similar to its recently-released R6300 router, which started shipping a few weeks ago, i.e. dual-band support, NETGEAR Genie, ReadySHARE storage sharing, DLNA media server, parental controls and IPv6 support.

The gateway will be available to service providers only, but NETGEAR did not say when.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I'm trying to setup a home lab and I'm trying to get DNS to resolve a server on my network.Well, I can't use the dhcp feature because it won't let ...
So basically. When it came. Its still fine . I just connect it to the internet. Let it update the firmware. Then reset . Then I go set the router for ...
hi i just bought the ax88u and replaced my ac88u.but i have a problem with the 5ghz wifi band. on my old ac88u i had around 300Mbit speed on my 5ghz b...
Recently got a M1 to try but signal not recognized by Asus, says "Your ISP's DHCP Has a Problem" (or something similar). So dug out old Cradlepoint MB...
I tried to update my AC87U to 384.12 firmware and the router just doesn't survive from the update and settings process. I'm using the router in AP mod...

Don't Miss These

  • 1
  • 2
  • 3