Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Amped Wireless logoAmped Wireless will start shipping an AC1200 class USB 3.0 adapter soon.

The ACA1 High Power 500mW Dual Band AC Wi-Fi USB Adapter is a dual-band draft 802.11ac adapter supporting maximum link rates of 867 Mbps in 5 GHz and 300 Mbps in 2.4 GHz.

Features include two upgradeable 5 dBi dual-band antennas (RP-SMA connector), USB 3.0 interface and transmit and receive amplifiers on both band radios.

Amped Wireless ACA1

Amped Wireless ACA1

The adapter can sit on a disk or be attached to a tablet or laptop screen with a supplied clip. Supported OSes include Windows XP, Vista, 7, and 8 and MacOS 10.4 to 10.8.

The ACA1 is covered by a one year warranty and is available for pre-order now direct from Amped for $89.99. Shipments begin next Monday, 22 July.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have just upgraded from an AC68U to an AC86U. I setup the 86U with the exact same settings (at least I think they are) as the 68U, however the Wifi ...
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3