Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

EnGenius logoEnGenius has announced two indoor AC1200 class access points.

The new EAP1200H Dual Band AC1200 Indoor Access Point and ECB1200 802.11ac 2x2 Dual Band High-Powered Wireless Access Point/Client Bridge support maximum link rates of 867 Mbps on the 5 GHz band and up to 300 Mbps on the 2.4 GHz band when used with 2x2 AC class devices.

The EAP1200H is housed in a low profile smoke detector form factor and the ECB1200 comes in a desktop format with four detachable 5 dBi high-gain antennas. Both have a Gigabit Ethernet port that supports 802.3at PoE, support band-steering and can be managed via EnGenius' free EZ Controller Software for Windows, MacOS and Linux.

Other features include Wi-Fi Protected Access (WPA) and 802.1X RADIUS support, MAC address filtering and secure guest networks. The ECB1200 also functions as a wireless client bridge.

EnGenius EAP1200H (top) & ECB1200 AC1200 access points

EnGenius EAP1200H (top) & ECB1200 AC1200 access points

Both the ECB1200 and EAP1200H list for $249 and will be shipping shortly.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello everyone,I'm looking to replace an older Linksys E1200v2 router with Freshtomato installed on it with a better router that provides higher throu...
I've searched a lot of posts but they're mostly old so I was hoping to get an answer. As of today, with latest and greatest Merlin, what's the best fi...
Hi to all,I have an RT-AX88U router running the latest Merlin Firmware (384.13) with DDNS configured to my host (host..com) which has been in use for ...
"Today, we show that security controls put in place by device manufacturers are insufficient against attacks carried out by remote adversaries."​ Loo...
Hi,I set it up using the PC as I was not able to connect using the Unifi Network App.As I tried using the App later on it say it was already paired to...

Don't Miss These

  • 1
  • 2
  • 3