Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Amped Wireless logo Amped Wireless has announced a new touch-screen router.

The TAP-R3 High Power Touch Screen AC1750 Wi-Fi Router is now its top-of-line touch-screen router supporting maximum link rates of 450 Mbps in 2.4 GHz and 1300 Mbps in 5 GHz when used with clients that support those rates.

The router is spec'd at 800 mW maximum transmit power and has a total of six transmit power and six low-noise receive amplifiers. There is one detachable dual-band antenna and two internal dual-band antennas.

Setup and management of the TAP-R3 is via color touchscreen, guided by setup wizards. There is a full complement of gigabit Ethernet ports (one WAN and four switched LAN) and a single USB 2.0 port supporting storage, but not printer, sharing.

Amped Wireless TAP-R3

Amped Wireless TAP-R3

You can pre-order the TAP-R3 now direct from Amped at its $199.99 list price, for shipment starting 8/19.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Stubby is an application that acts as a local DNS Privacy stub resolver using DNS-over-TLS. Stubby encrypts DNS queries sent from a client machine to ...
HelloI have RT-AC87U Router with latest Merlin firmware and my network have access to address starts from 192.168.10.1 to 192.168.11.254. My IP of rou...
As you already noticed entware-ng (http://pkg.entware.net/binaries/mipsel) doesn't get updated anymore.The repo on github is archived (read-only) and ...
Hi,I have RT-AC86U on latest merlin FW 384.7. At the same time i have 2 x 1Gpbs connection from 2 diff ISPs.I have configured load-balancing ratio of ...
Any ideas on how to get overclocking working on RT-AC68U running 384.7? I am using JFFS scripts to set clkfreq to 1200,666. This is working (verified ...

Don't Miss These

  • 1
  • 2
  • 3