Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

TRENDnet logo TRENDnet announced a PoE-powered AC1200 class access point.

The TEW-821DAP AC1200 Dual Band PoE Access Point is a simultaneous dual-band 802.11a/b/g/n/ac access point supporting maximum link rates of 300 Mbps in 2.4 GHz and 867 Mbps in 5 GHz when used with devices supporting those rates. Network connection is via a single 10/100/1000 Mbps Ethernet port, which also can power the unit via 802.3af Power over Ethernet. A 12 VDC port and included power supply can also power the AP.

The product can be configured in AP, Client, WDS, and Repeater modes and supports band steering to move clients to 5 GHz to reduce 2.4 GHz band congestion. A free Windows-based software controller manages multiple TEW-821DAPs.

TRENDnet TEW-821DAP

TRENDnet TEW-821DAP

Other features include MAC address access control, QoS, traffic management, band steering, captive portal support, 802.1Q VLANs, IPv6 support, 8 SSIDs per band, WPA/WPA2 PSK and RADIUS support and maximum client limiting.

The TEW-821DAP will be shipping shortly with a $134.99 MSRP.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey everyone, super excited to find this forum. I have some questions about setting up my home's internet network and not a lot of solid knowledge abo...
Been back and forth with Ring support they keep blaming the ac66u b1 router I'm using. I kept blaming the android app cause it worked fine on my pc, b...
I get 'Illegal instruction' when running any Entware app/command.Trying to run the setup script generates the same error.The problem appeared suddenly...
yesterday there was a major internet down. Today I’m back up and running, after the isp fixed the issue. On my end thou, power cycling the cable model...
I realise this would probably be far more trouble than it's worth, but if you never ask, you never get. I find the kill-switch function on VPN clients...

Don't Miss These

  • 1
  • 2
  • 3