Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Routing Performance

NOTE!Testing Notes:
WAN to LAN tests are all run with LAN endpoint in DMZ
LAN to WAN tests are run with LAN endpoint not in DMZ, except UDP Stream

The numbers in the chart pretty much tell the story. The Broadcom processor provides plenty of routing power. Especially impressive is the fact that the UDP streaming results show no degradation in speed and no packet loss.

I also ran 10 second IxChariot tests in both directions which looked pretty good and are shown in Figure 7.

Buffalo WBR-G54: Router thruput
Figure 7: Routing throughput
(click on the image for a full-sized view)

Routing Performance Test Results

Test Description Transfer Rate (Mbps) Response Time (msec) UDP stream
Throughput (kbps) Lost data (%)
WAN - LAN 20.4 1 (avg)
2 (max)
499 0
LAN - WAN 22.6 1 (avg)
2 (max)
499 0
Firmware Version 1.10 (1.14)
See details of how we test.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

For some reason, if I let the router auto-assign 5g channels, most of my clients lose internet access (AC clients). If I lock it on 36, all is fine. I...
RT-AX58U 3.0.0.4.384.8137https://www.asus.com/us/Networking/RT-AX58U/HelpDesk_BIOS/
Hello guys.I am trying to build stable internet for my office but I am little confused.I have like 50 clients(10-15 on each node) in my AIMesh(2x AC-8...
Is it possible to make Transmission (installed in Router) be affected by QoS rules? Because as it stands it looks like it's just bypassing it thus aff...
Hi,I have managed to reproduce a bug that was bugging me for some time now. I kept finding my WiFi down and the router turned off. Well, I believe I f...

Don't Miss These

  • 1
  • 2
  • 3