Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Basic Features

Since the Expander is intended to be as goof-proof as possible, it's pretty much a black, er, make that silver and grey box. It's slightly wider and thicker than your average PDA and attractively styled, aiming at a high spouse-approval rating.

Blue Link and Activity lights grace the top panel while Auto Configuration and recessed Reset-to-defaults buttons are positioned along its right side. The non-upgradable antenna is movable along a single 90 degree axis with locking detents at 0, 45 and 90 degree (to the Expander's body, that is) angles.

WRE54G Power plug detail

Figure 1: WRE54G Power plug detail

The Expander has an unusual power arrangement. The AC mains to DC converter is inside the enclosure, but the AC cord is attached via a paddle-like connector that slides into the back of the Expander enclosure and locks into place. It looks to me like at one point Linksys may have intended to supply an alternative power connector that would let the Expander snuggle right up against a wall outlet. But at least for now, you'll have to deal with the power cord.

One other "feature" is that the Expander does not have an Ethernet port. This means that it can't be used as a wireless bridge to a wired LAN and you must set it up from a wireless client.

A bright lime-green sticker on the front of the Expander's box says that the WRE54G "works with" Linksys' WAP54G, WRt54G and WRT54GS products and their website (at time of this review) expands on that notice with list of the "minimum firmware requirements you must meet" shown in the table below.

Model Number
Compatabile Firmware Version
WRT54G
2.02.2
WAP54G
2.07
WRT54GS
2.07.1

As I'll show later, this doesn't mean that these are the only products that the WRE54G will work with. But setting the Expander up with any other products means you won't get the benefit of the Windows-based setup wizard or Auto-configuration button feature.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

...

Over In The Forums

Hi,I last reported this issue about 3 weeks ago over GUI Feedback when one of my AiMesh Node (Bedroom) gone OFFLINE. I rebooted everything and all see...
Hello,I have installed mini_snmpd today, and could only get it to work on the router itself, and not from a local machine on the LAN side; Turns out t...
I've been trying to solve the issue for half the day today.Router AC68U, firmware Merlin 384.18.Ive set the 2.4ghz band to 40Mhz. Tried different chan...
I want to replace my Asus RT-N66U router (purchased in 2013) with a brand new model. Please note that this old router seems to work fine - I'm only re...
Hi,My setup is as follows:ISP router -> various computers 192.168.1.1, zxytel t-50Lan->WanVPN Router,->Smart TV 192.168.2.1, Asus N66UI am trying to g...

Don't Miss These

  • 1
  • 2
  • 3