Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Introduction

Linksys Wireless-G Ethernet Bridge with 5-port Switch

Linksys Wireless-G Ethernet Bridge with 5-port Switch
Summary 802.11g bridge with 5 port 10/100 switch supporting VLAN and QoS features, including bandwidth limiting
Update None
Pros • Low-cost bandwidth management and VLAN features
• Works with APs & routers without WDS
• Supports WPA
Cons • QoS can't be applied on an application level
• Poor wireless distance performance

After a series of uninspired products, Linksys seems to be getting its groove back again. First the NSLU2 [reviewed here], which is re-defining the SOHO NAS market and now the WET54GS5. Given the way its product description on its website is written, I'm not sure that Linksys realizes the value of the multi-talented little box that it has produced. But by the time you're done with this review, I hope that you will!

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...
I was doing some research and was seeing a lot about issues with the 2.4ghz band not working after a while or having very short range (or poor perform...
No matter what I put for upload/download bandwidth on a new RT-AX88U on Merlin 384.18, it will peg the upload speed at my ISP's maximum speed and ping...
Hi to all!I just installed Pyload and Transmission on my RT-AC86U. Now I have a problem. I have to set the router (192.168.1.1) to go to Internet thro...

Don't Miss These

  • 1
  • 2
  • 3