Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Routing Performance

I used Ixia's IxChariot to check out the N1's routing speed after updating the N1 to the latest 1.01.23 firmware. Using the Throughput.scr with TCP and file size set to 1,000,000 Bytes from the default 100,000, I was able to measure 92 Mbps WAN to LAN and 90 Mbps LAN to WAN. This is essentially 100Mbps wire-speed, given the limitations of Windows XP's TCP/IP stack.

Total simultaneous throughput in both directions came in at 132 Mbps (Figure 12), which shows the full capability of the N1's router.

N1 Total simultaneous throughput plot

Figure 12: N1 Total simultaneous throughput plot (click to enlarge)

But when I ran the Max Number of Simultaneous Connections test that I use to gauge how well a router will handle P2P applications, the N1 turned in extremely poor results. I was able to get the router to handle only 5 up and 5 down connections for my pretty easy one-minute test. Needless to say, this won't make the N1 a good choice if P2P file sharing is one of your favorite activities.

You can see the N1's routing results plotted against other products in our Router Charts.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi everyone.So we renovated the house a little while back but at that time the other half couldn't decide fully on layout so the cat 6 cable didn't ge...
I am setting up a AC68U for a client to be used as a WiFi extender. As I have 2 of the same routers I am very familiar with it set up and operation. E...
How can one delete routers and/or start over without uninstalling app?
Hi!My old wan-start worked fine. After updating to firmware .15 I renamed it to wan-event and adapted it to consider the new parameters. But it doesn'...
RT-AC68R with Merlin 384.13Recently installed latest shipping versions of Diversion and Skynet via AMTM (Awesome Tools!!!) and now I can no longer ssh...

Don't Miss These

  • 1
  • 2
  • 3