Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

It's a two-antenna design (2T2R) with around 88 Mbps of routing throughput and 10/100 switch.

In open-air testing, best-case wireless throughput with out-of-the-box settings (20 MHz channel mode) is around 60 Mbps, but with uplink running about 60% lower. Changing to 40 MHz channel mode doesn't improve maximum throughput, but evens out up and downlink speeds.

Read the full review.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...
Im sure this question has been asked before but I am trying to connect my AC3200 to a Meraki MX64. MX64 supports L2TP with PSK. Asus Merlin doesnt hav...
Hey allSo i have two netgear switch models.I have two nighthawk s8000 and two netgear GS 108's. Both 8 ports. My cable is 1 gigabit and and my system ...
So, I currently have 2 routers. One is a Linksys and the other is an ASUS, I don't think models really make a difference in the scenario. Basically, I...
When I click on "guest Network" I get this screen instead of the normal setup screen. Any ideas? total noob here...thanks

Don't Miss These

  • 1
  • 2
  • 3