Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Stress Test

This test shows what happens when both the wireless and routing sections of the router are running full tilt. The setup is the same as shown in Figure 1, but this time I ran only one downlink stream each on the 2.4 and 5 GHz radios and added a single WAN to LAN wired stream.

I first ran the tests with no bandwidth limits, i.e. blasting each stream as fast as it would go, which produced the results shown in Figure 5. The test starts traffic on the two wireless radios first, then the WAN to LAN routing traffic. You can see the dip in wireless throughput when the routing traffic starts and a huge rise in routing throughput when the wireless traffic stops.

Simultaneous 2.4 and 5 GHz plus routing - full bandwidth

Figure 5: Simultaneous 2.4 and 5 GHz plus routing - full bandwidth

Of course, not many of us, at least in the US, have 200 Mbps download speeds. So I limited the routing traffic to 50 Mbps for the test shown in Figure 6.

Simultaneous 2.4 and 5 GHz plus routing - 50 Mbps WAN to LAN traffic limit

Figure 6: Simultaneous 2.4 and 5 GHz plus routing - 50 Mbps WAN to LAN traffic limit

You can still see a reduction in 5 Mbps throughput when the routing traffic starts at the 10 second mark. But there doesn't seem to be much effect on 2.4 GHz throughput.

You would probably only see these effects if you had a very fast Internet connection loaded with heavy download traffic while running heavy streaming traffic on either or both wireless radios.

Of all the effects shown, the throughput reduction when both radios are simultaneously used is the one most likely to bite you in the butt, especially for uncompressed high def video streaming.

Closing Thoughts

These further tests show that the E4200's definition of "Maximum Performance" doesn't necessarily mean maximum on both radios and routing at the same time. Perhaps there's a Simultaneous Maximum Performance router from Cisco somewhere in the product pipeline.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).Aug 9th: Bet...
Hi,I have two asus ac68's in a mesh setting. I have a 4K tv in my bedroom which is right next to the room with the router on the upper floor, i have a...
Anyone has effective way to block Roblox? I tried everything but Roblox is not an easy target to block!
Hi and sorry if this gets asked ten times a day.I recently ditched our Xfinity all-in-one's wifi and bought what I thought would be something with sup...
Is a 'routed client' configuration possible on a AC86u with Asuswrt-Merlin? Routed client?I'm on vacation and the resort im staying only provides wif...

Don't Miss These

  • 1
  • 2
  • 3