Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

Feature Tour

I loaded the latest firmware onto the RT-N66U. A lot has been fixed since Tim looked at it last. HTTPS access and the ability to limit access to IP addresses has been added. The DLNA server now works well. But as I noted in the Merlin firmware review, the USB drive sometimes disappears sporadically and reboots won't bring it back; I have to physically pull the drive.

NAT loopback also now works well, as I was able to access local hosts by their internet FQDN from inside my network. The grammatical "Enabled" options which really meant "Enable" are also fixed. Even the VPN server connected right up for me with a Windows 7 Enterprise 64-bit client.

IPv6 is still rather confusing. It has support with Native, Native w/DHCP, Tunnel 6to4, Tunnel 6in4 and Tunnel 6rd modes supported. If you don't know what these mean or how to deal with the settings, you're on your own, unfortunately. The IPv6 page does now link you to an IPv6 FAQ. However, it didn't really tell me much.

In addition to sharing USB drives and printers, you can also plug in a USB 3G/4G modem to provide a backup internet connection, should the main WAN port go down. The list of options hasn't changed since we last looked at it.

USB Modem page

3G/4G USB Modem page

The image below shows the entire list of what you can do with the two USB ports. It has changed only slightly since we looked at it last, mostly in verbage.

USB applications

USB applications

That Parental Contol feature you see in the menu may disappoint you if you're looking for web filtering. Under Parental Controls you can only schedule Internet access (all or nothing) for users you define. The Firewall section does allow you to filter by URL, keyword and Network Service. However URL and keyword filtering apply to everyone and can not be excluded for any clients. Network Service filtering appears to be per client.

The Automatic mode QoS feature under Traffic Manager doesn't appear to have changed since we looked at it last, according to the FAQ within the page. The only "automatic" part of it is that it engages a default rule set that "sets online gaming and web surfing as the highest priority and are not influenced by P2P applications".

The QoS feature itself is still a bit odd. It looks like a priority-based system, with five levels. But instead of each level having a relative priority to the other, you set a max/min bandwidth percentage limit for both up and download for each level. You can see this in the image below.

QoS Traffic Manager

QoS Traffic Manager

The Traffic Monitor itself is unchanged and shows you pretty plots of bandwidth in real-time, last 24 hours and daily views. Unlike the Bandwidth monitor on NETGEAR routers, however, you can't set bandwidth limits or alarms. There's a screenshot in the gallery if you want a look, along with more shots of the admin interface with commentary.


A big addition to the router interface is AiCloud. AiCloud has several different options. But the jist is that it is supposed to let you share USB devices connected to the router anywhere via iOS / Android / Windows and MacOS apps. It also lets you share anything on the local network anywhere.

The rub is that even though you enable AiCloud within the router, you are still responsible for setting up the port forwarding to make it work. As we have said before, this does not meet today's standards for any product advertising "cloud" connectivity. If you're going to advertise "smart and easy" connection to a user's data from the internet, you'd better do that without requiring a user to futz with dynamic DNS, port forwarding, VPN configuration, etc. And relying on automatic port opening via UPnP isn't acceptable, either.

For AiCloud to work correctly you do need to set up dynamic DNS or connect by your WAN IP address, which is one step over what some cloud devices have the user configure. If you are using it as a second router (or even just as a switch) behind your primary router, it is smart enough to sense it's not the primary router and alert you to forward ports, even giving you the ports to open. I had mixed results with this configuration and confirmed with ASUS that multiple NATs are not supported.

Many devices with cloud features also don't require the configuration of dynamic DNS, instead going through a central server for connection to make it easier on the consumer. Many devices will also work through multiple NATs without router configuration, AiCloud does not. The dynamic DNS was easy to configure when setting up AiCloud. AiCloud will work well in the way most consumers have their routers configured.

AiCloud also allegedly lets you do a "Smart Sync" between chosen folders within the AiCloud app and ASUS Web Storage, which gives you 3 GB of free storage just for signing up. Try as I might, I could not get Smart Sync to work. I kept getting "Authentication Failed" messages. When I checked the Smart Sync log, it was completely blank. I've included screenshots in the gallery.

The main feature of AiCloud, accessing your devices anywhere, did work well for me, once I opened up the required ports in my router firewall had the router set up as the primary router in router mode and configured dynamic DNS. In the image below, you can see my list of Samba devices on the network through the AiCloud iOS app. Clicking on each device asked for authentication and then allowed Samba share access according to your credentials.

AiCloud iOS app

AiCloud iOS app

Closing Thoughts

One final note, the router can be run in Wireless Router mode or Access Point (AP) mode. Be careful when switching back and forth between the two, however. I found that the IP address will go back to its default, which may give you problems if your network is not in the same subnet as the default. I found this to be pretty annoying since my address range, was not the same as the router default.

Many functions are also missing when running in AP mode, most notably AiCloud. The option appeared to be missing and was not configurable in AP mode. I did leave it configured while switching from router to AP mode and found I could connect to AiCloud locally on my own network, so I know it is still present and working. Forwarding ports in that instance gave me mixed success.

For a deeper look at many of the admin interface screens, check out the gallery below.

Image Gallery

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2