Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP logo QNAP has introduced two Marvell-powered rackmount NASes.

The TS-421U uses a 2.0 GHz Marvell 6282 CPU and the TS-420U is based on a 1.6 GHz Marvell 6282 CPU.

Other hardware features include 1 GB DDR3 RAM, 16 MB of flash, dual Gigabit Ethernet LAN ports supporting failover and aggregation, two USB 3.0, two USB 2.0 and two eSATA ports.


QNAP TS-42XU rackmount NAS

QNAP TS-42XU rackmount NAS

The new pair run QNAP's v3.8.2 firmware with features including iSCSI target and initiator with SPC-3 persistent reservation and advanced MPIO and MC/S support, iSCSI LUN snapshot and backup, Windows ACL, VPN Server (OpenVPN and PPTP), Windows AD and LDAP support, Real Time Remote Replication (RTRR) and rsync backup and IP camera support via Surveillance Station Pro. Cloud storage options include AmazonS3, Google Drive, ElephantDrive and Symform.

The TS-420U and TS-421U are shipping now at MSRPs of $749 and $899, respectively.

U are shipping now at MSRPs of $749 and $899, respectively.

More NAS

Featured Sponsors

Top Ranked Routers




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, I have a 2 story home and am encountering poor wireless performance and dropouts on the first floor. I have an ASUS RT-AC66R on the second floor c...
Opening the WRT3200 case:1. Just like the WRT1900AC V2 the WRT3200ACM TTL port is located in the front of the unit. So only the two screws in the fron...
I recently purchased and installed a new modem, an Arris SB6183-RB. I went through the install with my provider and got everything enabled and set to ...
QTS 4.2.2 Build 20161021[Known issue]Back up- The Container Station folder can only be backed up using Rsync when no containers are running. It is rec...
Hi all,I am trying, unsuccessfully, to route all traffic from one of my guest networks. I thought I'd copy the routing that Merlin used for the TOR se...

Don't Miss These

  • 1
  • 2
  • 3