In Part One of this series, we established a working definition of our target, i.e. what has to be done, and in what order, to Cerberus the lowly IDS firewall to make it a UTM Appliance. In Part Two, we started the conversion by installing and configuring multi-WAN support, Squid, IDS and anti-virus features. This time, we'll add and configure Content Filtering, Traffic Control, Load Balancing and Failover.
As introduced in the first part of this article, pfSense has several packages for content filtering, from the simple to the sublime. When setting up Cerberus in the previous article, Build Your Own IDS Firewall With pfSense, we installed the first of these, IP Blocklist, which blocks IP addresses based on lists downloaded from a clearinghouse of list maintainers, i.e. iBlocklist.com. There you will find a large assortment of list flavors: Adult Sites, Compromised Sites, Torrent Sites, etc.
In addition to IP Blocklist, there are two very simple packages to install: Country Block and DNS Blacklist. Country Block is geared towards blocking the countries responsible for the highest volume of Spam, but can be used to block the Individual countries. It uses the national CIDR ranges from CountryIPBlocks.net.
Once installed, it is simple to configure. Select the countries you wish to block from a list of all countries. At the top, you’ll find a list of countries responsible for the largest volume of spam. Enable the service, select the countries you want to block, commit your selections, and save. Done.
Figure 1: Country Block configuration
Incoming traffic is blocked by default, but this can be changed along with logging on the Settings tab. You can also limit blocking to a particular interface, but it defaults to all interfaces.
The other simple package, DNS Blacklist, allows you to block specific categories of domain names. The package forces DNS to resolve all domains listed in the selected categories to Google's IP address. The categorized domain list is originally from the Université Toulouse 1 Capitole, and has been wrapped into the release. This means the lists are static, and are not updated regularly, limiting overall usefulness, unless you choose to update them manually.
Figure 2: DNS Blacklist configuration
DNS Blacklist offers a very lightweight alternative to the content filtering heavyweight, Squid Guard. It uses DNSMasq as a DNS Forwarder, so requires no proxy server or complex indexing.
The other alternative to content filtering is SquidGuard, a full bodied content filtering system that has more controls than a Gemini space capsule and is just as hard to get in and out of. To complicate this further, the SquidGuard tutorial on pfSense.org has gone 404.
Even with the difficulties of configuring SquidGuard, the functionality is compelling. You can choose what to block, for whom to block it, from what time to what time should the whole block thing happen, per entry.
The initial setup is a bit convoluted and requires a bit of dancing. First, you should select the blacklist provider you want to use. A meta-list is available from SquidGuard.org. The recommended set of lists is Shalla's Blacklists (List Archive: http://www.shallalist.de/Downloads/shallalist.tar.gz ).
Starting with the General tab (Services->Proxy Filter), enable the blacklist and paste the URL of your list archive, a tarball, into the value for Blacklist URL. Go ahead and save without enabling SquidGuard yet.
Figure 3: SquidGuard General Settings
Now move to the Common ACL tab. The common access control list handles filtering policy for everyone, and by default, web access is denied. We need to set it to ALLOW before enabling SquidGuard, otherwise we would lose all web access.
Expand the Target Rules List, there should be one entry, Default Access, set this to ALLOW and save.
Figure 4: SquidGuard Common ACL setting
We are still not ready to turn the key yet. We need to go get our blacklists, so move to the Blacklist tab. If the URL field doesn't contain your selected list URL, copy it from the General tab and download the list. It will be downloaded and loaded into SquidGuard database. Wait for the download to complete; this may take up to ten minutes, depending on the list archive.
Figure 5: Blacklist download
Once we verify we have a blacklist, we will be ready to kick-start this beast. Return to the Common ACL Tab and expand the Target Rules List. It should look like this now:
Figure 6: SquidGuard Common ACL Target rules
Now return to the General Settings tab, check all the logging you can, and check Enable. Save these changes and wait for the SquidGuard Service State to change to Started.
To verify that it is up and running, check the Filter Log under the Logging tab. If all looks good, go to the Common ACL tab and set the blacklist blk_BL_hobby_pets to DENY and Save. Return to the General Settings tab and click Apply. Now, try to go to the French Bulldog Club.
You should see:
Figure 7: URL denied
This is just the tip of the iceberg for SquidGuard. For example, it would be possible to redirect any references to the Fox News site to that of the NY Times, from 9 AM to 9:10 AM ...on only Karl the programmer's machine. Or more importantly, ensure that your kids are actually using the Internet to do their homework after school, instead of Facebook.
Related Items:Build Your Own UTM With pfSense - Part 2
Build Your Own UTM With pfSense - Part 1
Build Your Own UTM With pfSense - Part 4
Taming Your Network's Bandwidth Hogs - Part 1
Build Your Own IDS Firewall With pfSense