Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts


Setting up the GP2 is a pretty straightforward affair. The ports on the back of the unit are labeled, so along with the documentation that comes with the product, it's pretty hard to mess that up. Getting connected to the web interface might be a bit tricky the first time, however. The "Quick Installation Guide" says to connect all the cables, then launch your browser to connect to the web management interface. The User's Manual says to connect all the cables, then launch the CD to set up the device. The CD however, seems to assume you've launched it before doing anything, and your computer is still directly connected to your cable or DSL modem. 

Figure 3 shows the setup screen launched when you insert the CD.

CD Setup

Figure 3: CD Setup
(click image to enlarge)

One way or another, once you're connected to the web management interface, you'll see something like shown in Figure 4.

Basic Setup screen
Figure 4: Basic Setup screen
(click image to enlarge)

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2