Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

Construction Details

I wasn't able to open the base station, so I relied on the FCC filing photos instead. Based on the photos, the base station's radio uses a CSR BC417 BlueCore4-External device. This a single-chip radio and baseband IC for Bluetooth + EDR of up to 3Mbps. It requires 8 Mbit of external flash, which is supplied by the Spansion chip next to it.

The WHFX30 chip, shown on the base station board in Figure 4, is somewhat of a mystery. Based on what little information I found by Googling it, the chip appears to be a USB controller of some sort.

Base station board
Click to enlarge image

Figure 4: Base station board

The adapter has an interesting design. As you can see from the FCC filing photo (refer to Figure 5), the antenna is actually housed in the flip-open portion of the case. The design allows the antenna to be oriented in the same plane as the dipole antenna on the conference phone.

Adapter / Dongle opened

Figure 5: Adapter / Dongle opened

A closer inspection of the adapter, shown in Figure 6, reveals that it is also based on CSR Bluetooth silicon, but I couldn't find a reference for the 41814 part number that appears on the chip.

Adapter / Dongle board
Click to enlarge image

Figure 6: Adapter / Dongle board

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2