Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Basics

Tip 1: More Basics

As long as you're checking the basics, open the System Control Panel and go to the Computer Name tab. You can name each computer as you like (as long as each one has a different name). But make sure the Workgroup name on all systems is the same.

Given the limitations of previous versions of Windows and my own paranoid tendencies (at least when it comes to Windows networking...), I only use numbers and letters for both names and always use ALL CAPS for the Workgroup name.

Computer and Workgroup Names

Figure 2: Computer and Workgroup Names

I'm assuming that most LANs will be running off a single router with clients set to be DHCP clients (obtain address automatically). This should put all clients in the same Class C subnet with all IP addresses having the same first three "octets" (Example: 192.168.0.X).

Tip! TIP: Each of the numbers between the periods in an IP address is called an octet. Each octet is an 8 bit number.

But, what the heck, check the IP addresses on each computer anyway, to make sure they're following this rule. XP makes it easy, as shown in Figure 3.

Verifying IP address info

Figure 3: Verifying IP address info

The last basic we'll check is the Server service that actually shares the files. This is normally started when Windows boots up, but sometimes those helpful little "Wizards" that come with various pieces of networking gear or applications can get carried away and disable the service.

Open the Services Management Console (Start > Programs > Administrative Tools > Services) and scroll down until you find the Server service shown in Figure 4.

The Server service

Figure 4: The Server service

Double click it to open its Properties window and make sure it looks like Figure 5.

The Server service's Properties

Figure 5: The Server service's Properties

If you make any changes, close each window by hitting the OK button, and you'll probably want to reboot. If no changes are made, just close [X] or cancel all windows. [Thanks to Dan Withers for submitting this Tip!]

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have been having a problem with wireless home automation devices staying on the network as described here:
This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR.FlexQoS provides a fully customizable Adaptive QoS expe...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...
I have 384.18 currently but this was on the last build as well. My system log shows these entries multiple times and several times a day:"dnsmasq[437]...
Is there a way to block all DNS on port 53 except for a specified device? I looked at SkyNET and the Asus WebUI and didn't see anything that really fi...

Don't Miss These

  • 1
  • 2
  • 3