Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Features

Time to spend some money...

To test whether a laptop of more current design would eliminate this unbalance, we obtained a Dell Insprion 4100 with 1GHz Celeron CPU, 128MB of RAM, and running WinXP Home. Plot 2 shows the same test as Plot 1, but run with the Dell in place of the Compaq laptop. There's clearly still a send, receive imbalance, but the percentange differences are smaller, and average speeds are significantly higher. It's also interesting to note that the receive test has smaller variation in this case. Note also that in order to control the number of variables in the test, we used the Linksys adapter for this test, even though the Dell comes with a 10/100 adapter built in.

Dell: Receive vs Send

Plot 2: Dell laptop - Receive vs Send

To see if we could get a better feel for the relationship between processor speed and network throughput, we ran tests between three pairs of machines:

  • "dell" is the previously described laptop (1GHz Celeron)
  • "pat" is a Compaq Presario 5451 with 500MHz AMD-K6-2, 252MB RAM, Win98SE, and Netgear FA310TX PCI Fast Ethernet adapter
  • "rat" is the previously described Compaq Deskpro (733MHz Pentium III)

The results shown in Plot 3 show that the pairing of 500 and 733MHz machines turn in the slowest performance. Next best is the 500 and 1GHz pairing, followed by the best performance via the matchup of 733MHz and 1GHz machines. Although it's surprising that it took two over-500MHz machines to get at least 50Mbps network throughput in both directions, we can't really say that these results represent a hard rule, given all the variables in the experiment. But it's clear that faster is better!

Multi-pair comparison

Plot 3: Dell laptop - Receive vs Send

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

For reasons not important here, I have both Xfinity and FiOS connetions active at my house. (The FiOS will be the only permanent one, Xfinity goes awa...
Whenever I try to update/upgrade opkg I'm getting the following response:Code: admin@RT-AC68U-08B0:/usr/lib# opkg updateDownloading http://bin.entwar...
My post relates to an issue with ASUS AiMesh and 2.4GHz clients.I have configured a Blue Cave as the AiMesh router and 2x RT-AC68U's as AiMesh nodes. ...
Several times per day my AC-58U refuses to work on the 5GHz band.Looking at the system log I can see the following repeating 50-100 times:Jul 14 12:59...
Hi,Got the mesh system setup and tweaked the settings and wanted to test the masternode connection speed.I tried to ssh but there's no iPerf on neithe...

Don't Miss These

  • 1
  • 2
  • 3