Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Features

Conclusions

It appears that if you want to get the most out of networks that run at speeds higher than 10Mbps, you'd better have a fairly up-to-date machine. Our not-so-controlled experiment showed we needed two machines with processor speeds over 733MHz to get at least 50Mbps network throughput for both send and receive conditions.

If you're using a laptop / notebook computer on an Ethernet network, either get one with a built-in 10/100 Ethernet adapter, or make sure that you get a CardBus adapter. PC card adapters may be less expensive, but their 16 bit bus interface will definitely limit your networking throughput.

Although our experiments were done with Ethernet adapters, other testing we've done with 802.11a wireless adapters indicates a similar relationship between processor speed and throughput. So if you want to get the most out of 802.11a's higher networking speeds, you won't be able to use any of those $500 notebook close-out specials that look soooo tempting.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

For reasons not important here, I have both Xfinity and FiOS connetions active at my house. (The FiOS will be the only permanent one, Xfinity goes awa...
When setting up multiple VPN clients, it is my understanding that Client 1 has the highest priority, then Client 2, and so on. Does this mean that Cli...
Whenever I try to update/upgrade opkg I'm getting the following response:Code: admin@RT-AC68U-08B0:/usr/lib# opkg updateDownloading http://bin.entwar...
My post relates to an issue with ASUS AiMesh and 2.4GHz clients.I have configured a Blue Cave as the AiMesh router and 2x RT-AC68U's as AiMesh nodes. ...
Several times per day my AC-58U refuses to work on the 5GHz band.Looking at the system log I can see the following repeating 50-100 times:Jul 14 12:59...

Don't Miss These

  • 1
  • 2
  • 3