Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN How To

IPsec Client Configuration, continued

Step 3: Create the "To LAN" Security Rule

  1. In the wirelessvpn Properties window, deselect the Use Add Wizard check box then click the Add button to create a new rule.
  2. In the New Rule Properties window that opens, select the IP Filter List tab then click the Add button.
  3. In the IP Filter List window that opens, Type "To LAN" into the Name box, deselect the Use Add Wizard check box then click the Add button.
  4. In the Filter Properties window that opens, make the entries shown in Figure 7, making sure the Mirrored check box is checked.
  5. Click OK to close all the windows until you get back to the wirelessvpn Properties window.

"To LAN" IP Filter Properties

Figure 7: "To LAN" IP Filter Properties
(click on the image for a full-sized view)

Step 4: Create the "From LAN" Security Rule

  1. Starting at the wirelessvpn Properties window, repeat Step 3, but enter "From LAN" in the IP Filter List window and enter the info shown in Figure 8 in the IP Filter Properties window.

"From LAN" IP Filter Properties

Figure 8: "From LAN" IP Filter Properties
(click on the image for a full-sized view)

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Greetings everyone, this is my first post, but I follow this forum for quite some time.I have search the forum, but have found nothing or I did not se...
Hello!It’s me and my new 231p2 again.Going to upgrade the ram to 4gb, would this 4gb crucial be ok??Don’t think I’ll need 8gb thoughThankshttps://www....
Hello guys, I need suggestions and an honest opinion from you.I just moved to a new home and this is my current scenario:My current gig (Asus AiMesh):...
I have 2 RT-AC68Us with the second setup as an access point to cover more distance. Whenever I connect wirelessly to the AP, the speed is no more than...
i am having issues with my router not enabling the ports I tell it. I want to enable 8585. I am running 3.0.0.4.384_32799

Don't Miss These

  • 1
  • 2
  • 3