Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN How To

IPsec Client Configuration, continued

Step 6: Configure the "To LAN" Authentication Method

  1. Select the Authentication Methods tab, then click the Add button. The Edit Authentication Method Properties window shown in Figure 13 will open.
  2. Select the Use this string (preshared key) radio button, then enter your alpha-numeric string into the text box (the example uses "7n7eq8*").
  3. Click OK to close the window and your Authentication Methods tab should look like Figure 14.

Authentication Method Properties

Figure 13: Authentication Method Properties
(click on the image for a full-sized view)

Authentication Methods

Figure 14: Authentication Methods
(click on the image for a full-sized view)

Step 7: Configure the "To LAN" Tunnel setting.

  1. Select the Tunnel Setting tab and enter the WAN IP address of the remote VPN endpoint router. (In this example, the SX41's WAN IP is set to 192.168.3.254 as shown in Figure 15).

 

Step 8: Verify the "To LAN" Connection Type.

  1. Select the Connection Type tab and check that the All network connections radio button is selected.

"To LAN" Tunnel Setting

Figure 15: "To LAN" Tunnel Setting
(click on the image for a full-sized view)

Step 9: Save the "To LAN" rule.

  1. This completes the "To LAN" Rule configuration. Click the Close button to return to the wirelessvpn Properties window shown in Figure 16.

IP Security Policy Properties

Figure 16: IP Security Policy Properties
with completed rules

(click on the image for a full-sized view)

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I just flashed 384_10 (factory reset done as well) on a friends AC86U and although 5GHz radio is broadcasting fine, NO DEVICE can connect to 5GHz w...
Howdy.HW:1 x TD-W9970 TPLink1 x TG-789 Technicolor1 x R7000 with Merlin + AB-Solution/Diversion + 2 x VPN2 x Asus Blue Cave40 2.4Ghz devices... Sonoff...
move if needed i’ll be purchasing another r7000 or ac68u and running asuswrt merlin on whatever one i get. i posted it in this forum because you guys...
Hey allSo I have a 2 floor 4800 sq foot house and a gigabit cable connection.Cable for service comes out at one side of the house and I have RJ 47 run...
Does anyone know what this log entry is identifying and should I be concerned? Any info is greatly appreciated. ThanksAlso this shows right above that...

Don't Miss These

  • 1
  • 2
  • 3