Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

InterWorking Labs today announced Mini Maxwell, a portable, low-cost network emulator.

The product is a Layer 2 network emulator with the ability to apply packet impairments including drop/lose, duplicate, delay and reordering to five user-defined traffic "bands" in both transmit and receive directions. A variety of packet filters can be applied including IPv4 source/destination address, Layer 3 source/destination port, protocol, MAC address and more.

The Mini Maxwell measures 6" x 6" x 1" weighs less than two pounds and is controlled via a web interface. Two 10/100 Ethernet ports are available for traffic and one for control.

The product is available now for $1,499 direct from InternetWorking Labs' website.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

v1.0.0 Updated 2019-04-21 Quick access to controlling services and scripts on your routerscMerlin is free to use under the GNU General Public Licens...
I was running stock firmware for about a year. I wanted to kill my bufferbloat so I installed Merlin, & FreshJR. Things were working fine for a little...
Hey all, I'm in a basement. There is an Xfinity (ISP) hotspot in a building somewhere across the street and since I pay for xfinity service at another...
I am trying to stream games from my PC (Thinkpad P50 Laptop) to my TV (LG UH850v) using Steam in-home streaming.Here's how things are setup at the mom...
Hi,I recently got another RT-AC68U and none of the LAN and WAN ports are working. I tried various firmware and also looked at the output of nvram show...

Don't Miss These

  • 1
  • 2
  • 3