Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

The NETGEAR FVS318G ProSafe 8-Port VPN Firewall has eight Gigabit switched LAN ports, one Gigabit WAN port and is spec'd to provide 25 Mbps LAN to WAN throughput and 6,000 concurrent sessions. Hardware specs include a 250 MHz processor, 8 MB of flash and 32 MB of RAM.

VPN features include support for five IPsec tunnels that can be encrypted with 56-bit (DES), 168-bit (3DES), or 256-bit (AES), Manual and IKE keying, FQDN support for dynamic IP addresses and client-to-site and site-to-site tunnels. NETGEAR specifies total 3DES VPN bandwidth at 7 Mbps.

Routing features include NAT and standard routing modes, software-configurable hardware DMZ port, SPI + NAT firewall, keyword filtering, port/service blocking and a SIP application layer gateway

The FVS318G is available now via with street pricing around $130.

More LAN & WAN

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Has this utility been moved from the product support page?I am going to be making some firmware updates and wanted to have it in standby in case somet...
Loaded brand new Asus RT-AC66U_B1 with Merlin 380.70. It was empty, but I did reset it after flashing it. Then configured everything manually. I have ...
Hello all, I am trying to develop a remote firewall server that will run on my ac3200. Currently, I am running iptables commands by hand. I would like...
Hello everybody, this is my first post here, so please be gentle!I'm having issues with accessing my RT-AC88U web interface remotely via a PPTP tunnel...
I am not sure where to post this question.My daughter is buying a small business with 7 outside phone lines and a Panasonic phone switch advanced hybr...

Don't Miss These

  • 1
  • 2
  • 3