Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Tags:

gogoCPE version 1.0gogo6 has announced a plug-and-play adapter that converts any IPv4 home network to IPv6.

gogoCPE version 1.0 is a small adapter that can be installed to provide IPv6 service "within a minute". The adapter is designed to work with exising consumer networking gear and can be used to implement dual-stack home networks with either IPv6 using IPv4 or to deploy IPv4 using IPv6.

gogoCPE is designed to be installed by the end user without any support and supports TSP, DS-Lite, 6RD, DSTM and L2TP transition technologies. It runs the same code as gogoCLIENT, which is providing IPv6 to over 150,000 users of the Freenet6 service.

gogoCPE version 1.0 in use

Early customers of the gogoCPE include SingTel, Comcast and Globe Telecom.

gogoCPE is available now to service providers and to individuals via gogo6's website. Consumer units are preconfigured to work with Freenet6 with no setup required and cost $99 plus shipping and handling.

More LAN & WAN

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...
just a quick question, I have an rt-ac56u with 378.55 firmware on it, is it possible to update from 378.55 to 384.5 or is this too much of a jump??
HelloSorry if this is a repost of the same topic somewhere else.Im having issues when looking for devices at the traffic analizer page. I can see all ...
Hi all I have to put a new iptable rule. For that I have created a script and named it "firewall-start" and located it under /jffs/scripts/If I run th...

Don't Miss These

  • 1
  • 2
  • 3