Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

EnGenius logoEnGenius has announced a trio of Gigabit PoE smart switches.

The EGS5110P is a 1U rack-mountable 8-Port Gigabit PoE+ Smart Switch featuring eight IEEE 802.3at/af PoE ports and two SFP uplink ports. It has a total PoE budget of 130 W with up to 30 W per port.

The EGS2108P has eight Gigabit ports, four supporting IEEE 802.3af PoE at up to 15.4 W each for a total 61.6 W PoE budget. The EGS2110P has the same feature set as the EGS2108P plus two SFP uplink ports.

EnGenius PoE Smart switches

EnGenius PoE Smart switches

Smart switch features of all three include loopback detection, port mirroring, port trunking, bandwidth control, 802.1q QoS and 802.1p CoS support and port-based VLAN. 802.3ad link aggregation is not supported.

The EGS5110P is available now at a MSRP of $369.99. The EGS2108P and EGS2110P will be available in September at MSRPs of $199.99 and $249.99, respectively.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is there a way to block all DNS on port 53 except for a specified device? I looked at SkyNET and the Asus WebUI and didn't see anything that really fi...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...
New site with updated guide After many requests, I made this tutorial for pyload entware version, works on the following routers: RT-AC66U/R, R...
I currently have a wd my cloud but the remote access required me to port trigger to redirect the default ports form 80 and 443 in order for it to work...
New firmware was just released for the GT-AC5300 this morning EST, Aug 4th, 2020. Haven't checked the release notes yet. It's available via the admin ...

Don't Miss These

  • 1
  • 2
  • 3