Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

TP-LINK logoTP-LINK has released an eight port Gigabit switch with PoE on all ports.

The TL-SG1008PE 8-Port Gigabit Desktop/Rackmount Switch with 8-Port PoE is an unmanaged Gigabit Ethernet switch with all 8 eight ports supporting 802.3at/af Power over Ethernet.

Each port can supply up to 30W, with a total power budget of 124 W.

A built-in power priority feature cuts off power to lower priority ports (determined by port number) if power draw exceeds the 124 W limit.

TP-LINK TL-SG1008PE

TP-LINK TL-SG1008PE

The TL-SG1008PE is shipping now at a $199.99 suggested retail price.

More LAN & WAN

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I'm not very familiar with Linux commands and need some help in producing the kind of list I need.My directory structure is as follows:Fagan_NAS_01 (r...
So my architecture is that I have a AC1900 converted to AC68U, on Merlin as my main router upstairs. I also have a secondary router downstairs set up ...
Hi fellow Asus-Merlin users, I have recently stumbled into this issue. I have my NAS linked to the AC-68U running the last Merlin version 384.5, via 2...
RT-AC86U using merlin 384.5 firmware.I'm trying to get netflix to bypass VPN using ipset.I've read a lot on it. I've created the dnsmasq.conf.addCode:...
I am going to have a second ISP and want to switch to Dual WAN load balancing configuration.The current configuration (single WAN) is as follows: Eth...

Don't Miss These

  • 1
  • 2
  • 3