Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Performance - more

Even more distressing than the large difference between the throughput number on the box and best-case actual performance, is that throughput fell off quickly and was between 7 and 10 Mbps in most other locations. Figure 12 shows the NETGEAR XE104 pair again, but for Location 3.

Location 3 NETGEAR throughput

Figure 12: Location 3 NETGEAR throughput
(click image to enlarge)

I don't know what the deal is with the outlet used in Location 4, since it doesn't represent the farthest distance and is only about 10 feet away from the farthest Location 5 outlet. But it looks like Location 4 is as deadly for HomePlug networking as it is for wireless, since that's where most wireless products I test show worst-case performance, too. Figure 13 shows the difficult time that the Actiontec pair of devices had maintaining a connection there.

Actiontec Location 4 throughput

Figure 13: Actiontec Location 4 throughput
(click image to enlarge)

Since throughput fell off so quickly, I figured that something must be wrong with my test setup or methodology. So after rerunning tests and obtaining similar results, I fired off an email to Intellon for a sanity check of the results. However, Product Manager James Mentz essentially confirmed that my results were within the expected performance for HomePlug Turbo products, saying "If you go around a house and do a random outlet-to-outlet walk you should find that over 90% of the paths get at least 10 Mbps".

Mentz also provided data from HomePlug 1.0 (non-Turbo) field trials that said that technology can provide 1.5 Mbps of application-level UDP throughput 99% of the time and 4 Mbps of application-level UDP throughput 80% of the time. Note that UDP performance is usually faster than TCP/IP due to UDP lower protocol overhead.

By the way, the lower throughput of the SMC adapters was very repeatable. But when I substituted a NETGEAR XE104 for each adapter (one at a time), throughput jumped up to the range of the Actiontec and NETGEAR pairs. This is certainly curious, especially since the Diagnostic screen of the supplied utilities reported that all adapters were using the same Intellon firmware (version 1.5).

Wrapup

I think the NETGEAR XE104 wins this roundup for its compact design, built-in 10/100 four-port switch and relatively aggressive pricing. You'll also be more likely to find it discounted given that both Actiontec and SMC focus mainly on sales to resellers and VARs instead of retail.

But shame on Intellon and all these companies for not coming clean about what the Turbo technology really delivers for throughput. Prominently displaying a high throughput number that will never be seen in actual use is not fair to the average consumer, who usually doesn't read past the front of the product box. And adding "up to" that high number in small print on the back of the box doesn't cut it either, since they're just weasel words intended for manufacturers to hide behind instead of providing real information consumers can use to make an informed choice about what they're buying.

Sure, consumers can return products, but given that virtually all retailers now charge a 15 to 20% restocking fee, it doesn't seem right that buyers should have to pay to find out how over-optimistically spec'd products really perform, not to mention the wasted time and effort in doing so.

So unless you really need 10 Mbps vs. the 3-5Mbps you'll get from non-Turbo HomePlug, and are ok with paying twice as much for the privilege, I suggest leaving HomePlug Turbo products on the shelf. You'll not only save yourself money and disappointment, but maybe also send a message to manufacturers that you've had enough of their performance claim games and are not gonna take it any more!

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I am pleased to announce the release of CakeQOS-Merlin!Current Version: 1.0.2 (Changelog)CakeQOS-Merlin is a custom add-on for supported Asus routers ...
Dear experts,I have a problem when I am watching any Movistar+ channel. After a few minutes of watching any channel the screen freezes, and I simply c...
Hi, I'm running Merlin 384.19 on rt-ac86u. This morning, I disabled pretty much every native service the rt-ac86u has to offer, I think the media serv...
One of the reasons why I generally recommend to stick to your ISP's DNS server (unless requiring special filtering services) is that your ISP DNS is a...
v1.0.1 Updated 2020-05-20 Track your cable modem's stats (such as signal power levels), on your router. Graphs available on the Addons page of the W...

Don't Miss These

  • 1
  • 2
  • 3