Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews


Linksys Instant PowerLine EtherFast 10/100 Bridge

Linksys Instant PowerLine EtherFast 10/100 Bridge (PLEBR10)
Summary HomePlug compatible power line to Ethernet Bridge
Update None
Pros • No-brainer installation
• Comparable in price to HPNA 2.0 products
Cons • 5Mbps throughput best case
• Expensive relative to alternative products
• Need Windows machine to set security code

Although some companies who announced HomePlug power line networking products back in January are having second thoughts, Linksys is forging ahead with at least two of their Instant PowerLine products. This review will take a look at the Instant PowerLine EtherFast 10/100 Bridge (Model PLEBR10) and see how it stacks up against other networking methods.

Basic Features

The PLEBR10 comes in an attractive enclosure that's about the size of a thick paperback book (6.5 in. X 3.8 in. X 1.24 in. if you want to be exact) and sports the familiar Linksys purple, orange, and charcoal grey color scheme. There's a 10/100 BaseT RJ45 jack on one end of the box, and a power receptacle for the supplied power cord on the other. All indicator lights are on the top of the box and include Power, Link, Activity, and Collision LEDs for the power line side and Link, 100, and Activity LEDs for the Ethernet portion of the bridge.

Since the BR10 is a bridge and not a client adapter, it will connect not just one, but multiple devices connected to its Ethernet side to clients on the HomePlug part of your network (Linksys says you can have up to 16 HomePlug devices in your LAN). The Ethernet jack is wired so that you can use a normal UTP cable to connect the bridge to most Ethernet devices. But if you want to connect the bridge to your router so that your HomePlug-connected computers can share your broadband connection, you'll need to either use your router's uplink port, or use a crossover cable plugged into any of the normal router ports.

The BR10 uses the 5130 chipset from Intellon, who won the nod from the HomePlug Powerline Alliance as the baseline standard for HomePlug technology. This means that all the first generation HomePlug products will use this chipset, just as all HPNA 2.0 phone line networking equipment uses Broadcom's HPNA chipset. This doesn't necessarily mean all designs will be the same, however, since manufacturers still need to add the Ethernet and bridging chips or USB interface chips to complete their designs.

That wraps up the general description. Let's see what installation and configuration are like...

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all.Decided to do a M&M config on my 87U. Was on 384.11_2 and flashed the same firmware back on. Followed the M&M instructions to the letter. Also ...
Hi all,Thanks in advance for your help! I recently moved into a new home and signed up for Spectrum gig (about 970 down, 40 up), and I purchased an AX...
Hello,I recently got a MoCA 2.0 Bonded System, but for $120 and 'Gigabit' speeds advertised in a little disappointed. I had to run a new ethernet cabl...
Hello,I’m looking for capable WiFi access Points which could handle huge amount of concurrent connected clients without any problems. So imagine the f...
Have an 86U set up as my primary router and a 68U in the back of the house set up as an AP. I have roaming assistant turned on in both routers for bot...

Don't Miss These

  • 1
  • 2
  • 3