Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Setup and Administration, Continued

The VPN settings shown in Figure 3 and the Advanced Settings screen (not shown) are the same as the SX41's. Since I covered these capabilities in the SX41 review, I won't repeat the info here.

Linksys USBVPN1 - VPN screen

Figure 3: VPN screen
(click on the image for a full-sized view)

I didn't have any problem getting a subnet-to-subnet tunnel up and running with the BEFSX41 that I used as a test partner. The firmware revision in my review unit was titled 1.00.8, Mar 12, 2003, so I think that the VPN1 includes the fixes in the 1.44.3, Dec 24 2002 firmware that came loaded in the BEFSX41 that Linksys sent me as a test companion. (Curious that the most recent version on the Linksys download page is marked 1.44, Nov 27, 2002.) Note that you get only one Tunnel profile vs. the two in the SX41.

Given that Linksys pitches the USBVPN1 as a connection companion to the SX41, you'd think that the User Manual would include an example setup that included settings for both products. But maybe Linksys figured that most VPN1 buyers would already be familiar with the ins and outs of configuring an SX41, because the VPN1's User Guide VPN section is pretty much a copy of the SX41 manual's and doesn't include a router-to-router setup example. The manual does contain a few descriptions of SX41 features that didn't make it into the VPN1, though.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Over the past week or two Skynet using default settings has blocked: Microsoft Update and www.microcenter.com. A denial of service is the largest sec...
Afternoon everyone.Probably a much debated subject but looking for a current day answer if possible without bumping old threads.Currently have a Night...
I’m setting the network up with a opnsense firewall and switches. I would like to have certain devices, like guests and IoT devices, on a VLAN. Is it ...
Hello all,I never had a problem with Skynet. But recently I add another internet connection and decided to use load balancing in MikroTik router and n...
I have a mesh network with firmware fully updated. When I go to the web admin interface after the session timeout I never get the login screen. I get ...

Don't Miss These

  • 1
  • 2
  • 3