Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

FTP Server

Since OvisLink says they didn't have room to implement a SAMBA server to provide complete Networked Storage features, they opted instead to include a decent FTP server. To check this feature out, I plugged in the 160GB One-Touch USB 2.0 drive that Maxtor loaned me for my review of Linksys' NSLU2 Networked Storage Adapter and a 32MB Flash drive I had lying around.

OvisLink MU-9000VPN FTP volume info

Figure 5: FTP volume information

Both drives were recognized without muss or fuss and Figure 5 shows how they appeared when I clicked on the Show USB Storage button on the FTP Server Configuration page. I liked that the server recognized both drives, even though the OneTouch was formatted for ext3 and the USB Flash drive FAT formatted.

OvisLink MU-9000VPN FTP server settings

Figure 6: FTP Server configuration

Figure 6 shows you get a pretty good set of controls including port, active / passive mode (including setting the passive mode data transfer port range) and maximum number of clients to name a few. Following good security practice, the FTP server is disabled by default and even when enabled defaults to being available to LAN clients only.

OvisLink MU-9000VPN FTP User Account setup

Figure 7: FTP User Account setup

Figure 7 shows the user account settings, which include the ability to limit maximum upload and download speed and limit user access to specific IP addresses or ranges. I set up both Anonymous and normal accounts and logged in using an FTP client and IE and Mozilla browsers without problems. I also successfully made file transfers in both directions using both my FTP client and drag-and-drop with IE.

I would have liked to see a simple disable for FTP user accounts, though you can accomplish (almost) the same thing by changing a user's password to a different, strong one.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

A feature request to Asuswrt-Merlin branchI've got an rt-ac86u operating in AP-mode behind a firewall. It would be nice to be able to take advantage o...
Experiencing a very strange issue with my RT-AC86U. Everything works great via the 5GHz radio (eth6), but when a device connects to the 2.4GHz radio (...
Hi do not be angry. I do not speak well in English.My trouble would be such that I bought it a little of my money was a new routert finally.Too I am b...
I don't log in to github all that often, but I did just now and saw this: cooking something special ...
Hey All,So i've done a search here but haven't found a solution.I have an asus RT-AC68U and had Merlin's 380.68.4 firmware on it. I updated to 384.13 ...

Don't Miss These

  • 1
  • 2
  • 3