Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

SMC Barricade Plus Cable/DSL Broadband router Review

VPN version of popular Barricade router with SPI based firewall and PPTP / IPsec VPN endpoint, but no printserver or dialup WAN support.Will probably do better with PPTP vs. IPsec-based VPNs

Linksys BEFVP41 EtherFast Cable/DSL VPN Router

The past few months have seen a number of introductions of consumer priced routers with built-in VPN Endpoints. Although this kind of product has been around for awhile, they've tended to be pretty expensive ($500 and up) and out of the range of most folks (unless their company was footing the bill!). So how can a company come along and do the same thing for under $150? Well, that's what I wondered, too, so I took a pair of Linksys BEFVP41's into the lab and had at 'em. You can see how they did in the resulting review.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I was looking for some help with home/small business network advice. With the kids in remote learning and working from home with possibly starting our...
So I've installed Skynet all fine, I get to the stage where I can block an IP range but it keeps saying I have entered an invalid range. How do I need...
Hi,what's the difference between the two suricata_manager scripts on github? (ttgapers vs juched78)thx
Is it possible to setup Optware-NG and Entware-NG on 2 separate drives/USB sticksto make use of both appliances?
I have a mesh network with firmware fully updated. When I go to the web admin interface after the session timeout I never get the login screen. I get ...

Don't Miss These

  • 1
  • 2
  • 3