Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The single-bay TS-119 and dual-bay TS-219 Turbo NASes use the new Marvell "Kirkwood" processor, have 512 MB of DDRII RAM and support up to 2 TB SATA drives. The TS-219 supports online RAID expansion and migration.

Both models support the full range of QNAP features including scheduled power on/off, UPnP/ DLNA media serving, download service and LAMP web-serving. Both products can support additional USB drives and USB print serving via three USB 2.0 ports. The TS-119 also has one eSATA port.

MSRPs for the TS-119 and TS-219 are $319 and $399 respectively. QNAP did not say when shipments would begin.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

My GT-AC5300 is only getting between 50mbps and 150mbps. I have a gigabit connection. From the modem directly, I get 900mbps. I've changed cables and ...
Hi folks, Wondering if you're able to help. Recently upgraded from the ISP-provided router for our gigabit fibre to the Asus RT-AC86U. With the defaul...
So, this is a thing that has bugged me for a long time. When I am on the Network Map page, I see the clients connected with 31 connected clients. Then...
I ran into this issue early today and figure to upgrade the firmware to 384.8_2 since it is available (hoping that fixes the issue)...But I still can ...
Hi..This is related to Asus RT-AC88U firmware version 384.8_2 but I always get "Cannot assign requested address" and "Failed to get IP for interface e...

Don't Miss These

  • 1
  • 2
  • 3