Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Seagate GoFlex Home Seagate today announced a second network sharing product for its new GoFlex hard drive line.

The GoFlex Home network storage system joins the GoFlex Net as an option for converting Seagate's new SATA-based GoFlex drives from direct-attached to network-shared.

The GoFlex Home works with larger GoFlex Desk drives that use 3.5" SATA drives, while the GoFlex Net uses GoFlex "Ultra-portable" drives, based on 2.5" SATA drives.

Network connection is via a Gigabit Ethernet LAN port and a single USB 2.0 port supports expansion storage or USB printer sharing. A power saving (idle) mode automatically spins down the drive after 30-minutes of inactivity.

The GoFlex Home runs Axentra's HipServ OS, which provides both local and remote-access file sharing as well as DLNA-based media streaming. Bundled GoFlex Home software includes three licenses of Memeo Instant Backup for PCs and Macs, and five seats for remote access (Seagate Share). Additional instant backup licenses or Seagate Share Pro seats may be purchased.

The optional Seagate Share Pro remote access service includes mobile device ( iPhone, iPad or BlackBerry) data access, Facebook and Flickr integration and RSS notifications.

The GoFlex Home includes a base and removable1TB or 2TB GoFlex Desk drive. The product will be available shortly at MSRPs of $159.99 for 1TB and $229.99 for 2TB.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all,New here but hopefully, some of you folks can assist.I've got a 3 router set up (all AX88U) using AI Mesh. 1 is backhauled and 1 is currently w...
Does anyone have the defualt NTP and Network Monitoring settings to hand?I was bored yesterday and had a play with these settings only to realise when...
.Please delete - became a general network query so moved.
I know that for 99% of the people on this forum that this question is very simple but not for meI know that DHCP has something to do with allocating I...
I downloaded the latest factory firmware for my x4s7800. I tried to install but I keep getting a msg. "The firmware is incorrect". I am using Voxel's ...

Don't Miss These

  • 1
  • 2
  • 3