Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus XXX NAS familyThecus today introduced its new Atom-based XXX NAS family.

The five XXX products range from a dual-bay desktop to eight-bay rackmount. All use Intel Atom CPUs, with four of the five using the dual-core D525.

All have dual Gigabit LAN ports and 1 GB of RAM and eSATA and USB 2.0 ports for storage expansion.

All of the new models run Thecus' new V5 firmware that features a new user interface, new photo and media servers, improved performance, EXT4 file system and support for 3 TB drives.

Thecus XXX NAS family

Models and pricing (MSRP) are:

- N2200XXX ($470): Dual-bay Atom D525 NAS with SD, SDHC, MMC card reader

- N3200XXX ($459): Three-bay NAS with single-core Atom N270 CPU

- N5200XXX ($740): Five bay Atom D525 NAS

- 1U4200XXX ($1030 / $1430 for redundant power model): Four-bay 1U rackmount Atom D525 NAS

- N8200XXX ($1,870): Eight-bay 2U rackmount Atom D525 NAS

All are slated to begin shipments by the end of March.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all,just upgraded our fibre broadband from 500mbs to the new 1gig service, which comes with the new Superhub 4. Always used our previous 500 servic...
I am running FreeNAS on a Supermicro X8SIL-F server with Xeon L3426 CPU and 32 GB ECC RAM connected through a HBA card to a Dell MD1000 with 15 2TB 3....
Since increasing the memory on an HP Gen 8 Microserver from 4Gb to 8Gb the micro-server refused to boot from the sdcard which had previously worked.Si...
So I updated my router(AC86U)/nodes(AC88U, 2x AC5300U) to 384.18 this weekend and found the new GPL's this is based on now allow setting fixed channel...
I have my 2.4 g radio set to 11and my 5 g radio set to 48 my question is what channel does my wired Roku device use ?? I am asking because if I try an...

Don't Miss These

  • 1
  • 2
  • 3