Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Seagate and LaCieSeagate has announced its intent to acquire LaCie.

Seagate has offered to purchase from Philippe Spruch, LaCie's chairman and CEO, and his affiliate, all of their shares, representing 64.5% of the outstanding shares of LaCie. The all-cash offer at current market value comes in at $186M.

The deal is aimed at adding LaCie's higher end direct-attached and networked storage products to Seagate's consumer product line, with an aim of boosting growth in consumer storage, with a focus on European and Japanese markets.

The acquisition is expected to complete in Q3 of this year.

Read the full release.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi Guys I'm totally new here, so forgive my ignorance. I've setup an RT-AC5300 at my in-laws home and put the Sky hub into Modem-Only mode (well, disa...
Been running this RT-AC86U for a little over a month now. 1st thing I did was to load Merlin firmware which seems to be running fine. A short while b...
I'm trying to build NoDogSplash on AsusWrt Merlin 384.14. Compile is fine, configuration also ok. But when I start nodogsplash, it complaining that ip...
I just replaced my Asus 1900P running Merlin with a Netgear r7800 running Voxel 1.0.2.72SF. So far it seems to be running well. Was curious if there a...
Hi. Noticed a few people in other posts mentioning that they use a higher end router as a node. I was thinking of doing this but not sure if it would ...

Don't Miss These

  • 1
  • 2
  • 3