Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

ASUSTOR logoUpdated - ASUSTOR has added four Intel Celeron powered NASes.

The AS5002T and AS5004T run on 2.41 GHz dual-core Intel Celeron J1800 CPUs with 1 GB DDR3 RAM, while the AS5102T and AS5104T are based on 2.0 GHz quad-core J1900 Celerons with 2 GB RAM. RAM is expandable to a total 8 GB RAM in all models.

Port complement for all four is dual aggregatable Gigabit Ethernet, two USB 2.0, three USB 3.0, two eSATA, one HDMI and one S/PDIF. All accept 2.5" and 3.5" hard or solid-state drives.

ASUSTOR 5 Series NASes

ASUSTOR 5 Series NASes

The new models run ASUSTOR's ADM 2.3 operating system with new features including support for TFTP, SMB 2.0 and proxy server connection, multiple data protection mechanisms and Windows ACL advanced file permissions management.

The AS5002T, AS5004T, AS5102T and AS5104T all have three-year limited warranties and will be available shortly. MSRPs are $308, $408, $408 and $508, respectively.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I am trying Aimesh with a AC86U as a router node, and AC68 as a Edge Node, however, I got very bad wifi performance, and only get 30Mbps performanc...
i know 802.3af standard is limited to 100m. i would like to install an access point 800' away from my switch. POE extenders are an option, but does an...
*** WARNING: This is a post aimed to newbies like me! ***‚Äč Hi there,I just managed to successfully install Merlin's firmware (june 2018) to my AC68U ...
I am using AC66U-B1 with stock firmware,I open guest network at 2.4Ghz but I dont't want to expose real MAC to guests.I want to change 2.4gHZ MAC addr...
Two routers provide different LAN address spaces. 1) Gateway address 192.168.0.1 with clients on the 192.168.0.0/24 subnet 2)Gateway address 10.0.0.1 ...

Don't Miss These

  • 1
  • 2
  • 3