Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

QNAP logoQNAP new TS-x53A NASes sport Intel Braswell CPUs.

The TS-x53A family includes 2, 4, 6, and 8-drive bay models based on quad-core 1.66 GHz (burst 2.08GHz) Intel Braswell N3150 processors with 4 GB DDR3L RAM, expandable to a total of 8 GB.

All models include hot-swappable bays accepting 2.5" and 3.5" hard or solid-state drives, two 4K-capable HDMI outputs, four USB 3.0 ports, IR receiver for remote control and two audio input and one audio output jacks.

All have four aggregatable Gigabit Ethernet ports, except the two-bay TS-253A that has two. All can also be expanded via UX-500P or UX-800P expansion cabinets.

QNAP TS-x53A Series NASes

QNAP TS-x53A Series NASes

The new series include Intel's AES-NI hardware-accelerated encryption engine that QNAP says supports transfer speeds of up to 412 MB/s with AES 256-bit encryption for both full NAS volumes and shared folders. Other features include a new Linux Station, QNAP Snapshot file recovery, Qmedia channel for Roku players and TVs and QNAP's wide range of built-in and installable applications.

Models and MSRPs are:

  • TS-253A-4G/8G (2 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $499 / $649
  • TS-453A-4G/8G (4 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $599 / $749
  • TS-653A-4G/8G (6 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $799 / $949
  • TS-853A-4G/8G (8 x 2.5/3.5 inch drives, 4GB/8GB RAM) - $999 / $1149

Everything is shipping now.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors


Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I have a RT-AC55U router and I am just wondering how could I set the client id - option 61?My broadband provider is Sky. I'd like to change the sky...
I've tried Port Mapping to a single port, and Transmission is saying the port is closed. I tried Port Triggering for that port, also remains closed. T...
Hello,I have problems installing entware on an AC56U with 380.68_2 firmware installed.I followed the steps in the guide but it does not work whatsoeve...
Hi All,I seem to get random reboots, mostly when UDP (gaming) traffic is running through the AC-5300 I have that's running 380.68_2.Being an IT guy, I...
I have bought Ubiquiti Edgerouter Lite ERlite-3, and early October I have appointment with computer tech guy to come out to do house call to configure...

Don't Miss These

  • 1
  • 2
  • 3
Get Backblaze Now!