Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Performance, Continued

The performance of a network file system, i.e. how fast your computer can read / write data to a network drive, depends on factors specific to the system running the test. So put the results in perspective, I compared the iozone results against a Linksys NSLU2, Buffalo Technology Kuro Box, Simple Tech SimpleShare, Synology Diskstation and Maxtor Simple Share.

The plots in Figures 13 and 14 show read and write speeds respectively for a fixed file size of 128 MBytes and record sizes from 64 to 16384 kBytes. Experience has shown that a file size of 128 MBytes usually shows performance free of caching effects and therefore more indicative of what the product itself is capable of. Since the same test computer and network connection was used for all tests shown, the results are about as apples-to-apples as you're gonna get.

128 MByte file Read comparison
Figure 13: 128 MByte file Read comparison

(click image to enlarge)

The plots show both the Net-Stor and Simple NAS at the bottom of the pack for both read and write, with the Tritton Simple NAS taking the prize for poorest performance seen to date!

128 MByte file Write comparison
Figure 14: 128 MByte file Write comparison

(click image to enlarge)

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
Hello,I've been using asuswrt-merlin firmware for quite some time in my AC87U router. I was running version 384.9 since today when I decided to upgrad...
This is a bit of a long and complicated problem, and it is in two parts... so please bear with me.I have the following equipment.A Plusnet one hub (I ...
I am having a problem loading Merlin on my RT 86u.the stock version does not allow me to select the merlin software on my PC , it only has the firmwar...
I would like to be able to tie OPENVPN to a specific SSID or LAN port, e.g I want default traffic go out on the Internet, but specific devices to use ...

Don't Miss These

  • 1
  • 2
  • 3