Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Reviews

Under the Covers

It’s quite simple to disassemble the Snap Server 110. Just two screws on the rear panel and two screws on the bottom hold it together. You’re probably not going to want to disassemble your unit though, as you’ll void your three-year warranty. A piece of holographic tape seals the case to the chassis, and even if you’re careful not to tear the tape, the word VOID is transferred from the tape to the chassis upon removal. Still, I forged ahead and opened the case so I could show you the interior.

Interior view of the Snap Server 110 with drive mounted
Click to enlarge image

Figure 2: Interior view of the Snap Server 110 with drive mounted

Once the four screws are removed, the front panel pulls out, and then the entire chassis can be removed from the case (Figure 2). This model is powered by a Maxtor MaxLine III 250 GB SATA 150 drive (Model 7L250S0). It’s held in place by four screws that attach the drive to vertical mounting tabs on the chassis.

Snap Server Interior view with drive removed
Click to enlarge image

Figure 3: Snap Server Interior view with drive removed

Removing the four mounting screws of the drive and setting it aside reveals the motherboard (Figure 3). The 110 is powered by a VIA Esther processor running at 1 GHz, and 256 MB of memory. This combination of hardware enables the 110 to turn in some great performance numbers, which I’ll get to later. Power consumption, at 24 W, is a bit on the high side for a single-drive NAS. There are no idle spin-down or timed shutdown/startup options for energy-conscious users.


Setup of the 110 is, forgive me, a snap. Once connected to your DHCP enabled network, you can either enter http://SNAPnnnnnnn into your browser, (where "n" is the server number found on the bottom of the case) or you can install the Snap Server Manager. The Snap Server Manager (Figure 4) is a Java-based tool that lets you manage either a single Snap Server, or, with the purchase of an additional license, multiple servers from a single console. Double-clicking on a server opens a window with summary information on your server. From the administration tab, you can launch your web browser to administer the server.

Snap Server Manager console
Click to enlarge image

Figure 4: Snap Server Manager console

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Not sure if anyone saw this, but I have some real concerns with Amazon implementing this type of technology and the potential security risks associate...
I have an Asus RT-AX86U and yesterday I ordered ExpressVPN. I was able to set it up easily enough, downloading the .ovpn file from ExpressVPN. When I ...
v4.0.0Updated 2020-11-22spdMerlin is an internet speedtest and monitoring tool for AsusWRT Merlin with charts for daily, weekly and monthly summaries....
Has unbound for Merlin been updated to 1.12 yet?
My second 86U just died today (boots and then shuts down). It was an RMA replacement for one I purchased in 2018. According to the ASUS website it is ...

Don't Miss These

  • 1
  • 2
  • 3