Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Glenn Fleishman has a long piece over at Wi-Fi Networking News that expands on some of the issues I covered in my post of a few weeks ago. It also provides some new insight into some of the issues regarding 11n and its operation in the 5 GHz band.

Glenn gives props to Apple for its decision to not allow use of "wide channels", i.e. channel bonding or 40 MHz mode, in the 2.4 GHz band. It should also be noted, however, that Intel has done the same thing in its new draft 11n chipset. Buffalo Technology didn't go quite as far with its new dual-band gear, choosing only to default to 20 MHz mode in the 2.4 GHz band. It's still possible for a user to manually switch the Buffalo gear to channel-bonding mode, however.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I have RT-AC86U on latest merlin FW 384.7. At the same time i have 2 x 1Gpbs connection from 2 diff ISPs.I have configured load-balancing ratio of ...
Any ideas on how to get overclocking working on RT-AC68U running 384.7? I am using JFFS scripts to set clkfreq to 1200,666. This is working (verified ...
I'm trying to connect a computer to my Asus ac87 using OpenVPN but running into some issues. One of my computers keeps disconnecting form the VPN conn...
Hi All,Not sure if what I want to achieve *can* be achieved, but thought I'd run this past the more experienced heads on this forum .....I have an ASU...
Did ASUS ever get this thing ironed out, or does it remain a mixed bag? Prices are getting pretty low now. Thought the newer firmware might have helpe...

Don't Miss These

  • 1
  • 2
  • 3