Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Well, good ol' Netster (that's our site mascot) sorta missed being in the thick of things and kept at me until I convinced our friends at TG Publishing to unleash him again. So after a few months of working on getting SmallNetBuilder back up, the site is far enough along to come out of hiding.

I'm still settling in though, and there are plenty of rough edges and code to tweak. So if you find something wrong, just drop a line or use the comment form.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have just upgraded from an AC68U to an AC86U. I setup the 86U with the exact same settings (at least I think they are) as the 68U, however the Wifi ...
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3