Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Yes, as you might expect, it appears that Draft 802.11n is actually used in the products. The FCC report for the WRT100 router shows test results for both 20 and 40 MHz Draft 802.11n OFDM modes, including spectral plots.

So why not say so? My guess is that one of the reasons might be to avoid price erosion of Linksys' Draft 11n products. After all, if you can get the benefits of Draft 11n for a hundred bucks, why pay more?

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey everyone!I have an RT-AC56R that will not flash anything at all, this includes stock, merlin, and dd-wrt.I used to have dd-wrt on this but decided...
I have my RT-AC5300 (merlin powered) setup as my primary devices connected to my modem, I have used one of my RP-68U in a wired AP mode setup.The 5300...
Hi,I installed a NVR(Network Video Recorder), and I want to setup VPN for that.(I want to see it remotely and securely), and of course I want to setup...
Lets say:you can take at most two network infrastructure devices to travel with in a small bagyou are travelling in a party and have multiple 3x3 WiFi...
Hello everyone. I have broadband connection with static IP. My objective is to access my *files* from anywhere in the world in a secure manner - throu...

Don't Miss These

  • 1
  • 2
  • 3