Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

It's not a question of development time. There are plenty of excellent solutions that make setting up forums a snap. The holdup has more been a concern about return on investment (primarily my time). Would SmallNetBuilder forums attract enough of a critical mass of knowledgeable participants to make it actually useful?

The last thing I want to do is have yet another place where people with good intentions, but too little knowledge, provide advice to people who don't know enough to filter out bad information. And I don't really want to spend time answering the same questions over and over again from people who are too lazy use the knowledge bases and tutorials that already exist in abundance.

So what do you think? Should SmallNetBuilder add forums? And if we do, will you participate and help it to be a worthwhile place to hang out?

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

HelloHere is my problemI have 2 routers: GPON router that connects to internet and DSL-N17U that manages sharing internet across all devices. GPON rou...
Hello,I have a problem with port forwarding on an ASUS RT-AC66U. I'm trying to run a DNS server on the LAN behind the router. I've set the port-forwar...
RT-AC68U - FW: 384.8_2I have two AC68U, one in default router mode and 1 in AP mode. The one in AP mode gives me 950 mbps however the one in router mo...
Hi all.My current setup is long in the tooth and I'm looking to upgrade.Currently I have 2 WNDR-4500's, a v1 as router and wireless in one section of ...
I am in the UK (and the router was bought through a UK website), but looking at the channel list I noted that it was showing the US 5Ghz channels (inc...

Don't Miss These

  • 1
  • 2
  • 3