Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2015

CES logoQNAP is previewing AMD-based NASes at CES 2015.

The TVS-X63 line includes four-bay TVS-463, six-bay TVS-663 and TVS-863 / 863+ models shown below.

All run on a quad-core 2.4 GHz AMD Steppe Eagle x86-based SoC with 4 GB RAM and have four Gigabit Ethernet, two USB 2.0, three USB 3.0 and one HDMI ports. The AMD processor supports hardware-based encryption and video transcoding.

The -663 and -863 support an optional 10 GbE card via one built-in PCI-e slot. The TVS-863+ comes with 8 GB of RAM and with 10 GbE installed.

QNAP CES 2015

QNAP CES 2015

All models are already up on Amazon, priced at $799, $999, $1199 and $1349 for the four, six, eight and eight + models respectively.

QNAP will also be demonstrating new features in its upcoming QTS 4.2 NAS OS. Demonstrations include Connected Home integration with Crestron, RTI, and AMX and new enterprise features including Snapshot for Volume and iSCSI, Snapshot Replica, Central Management System and Snapshot agent for Windows VSS.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have just upgraded from an AC68U to an AC86U. I setup the 86U with the exact same settings (at least I think they are) as the 68U, however the Wifi ...
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3